Swedac have a well-thought-out range with airborne sound absorbents for different applications. We stock in large quantities for prompt delivery.
We also cut down material for several clients to specific dimensions to facilitate mounting. We deliver with or without pregelatinised back.
The purpose of airborne sound absorbing material is about to pick up sound waves in the space that they are fitted. The more the better is a basic rule, but usually it is enough to attached to a pair of surfaces to take effect. The acoustic absorption means intercepting sound waves. The energy in the sound then passes to heat in the absorbent material.
The need for sound absorption is dependent on the size of the space, acoustic properties and the purpose of sound absorption. Acoustic Panels can be used on most surfaces and applications.
Swedac has over the years helped various companies with recommendations where there has been clear goals of what you want out of an installation.
The oil and waterproof airborne sound absorbent of polyether foam with a surface layer of 0.025 mm polyurethane film.
Area of use
The absorbent is further used in areas where demand for oil and water resistance is required, such as lining inside engine compartments in cars, tractors, trucks, construction equipment, boats, compressors etc .. The film is tested against a variety of liquids and chemicals.
We can also laminate the insulating mats in the absorber to have a double wall construction for increased sound reduction. This product is referred to as the FAI and made to order with fast lead time.
Airborne sound absorbent of inter foam without surface layer.
The absorbent is used internally in areas where they do not have requirements for appearance, surface wear or dirt and water repellent finish.
Also used for impact sound insulation in floors, both comprehensive but also for studs. UAR-10 has been used, among other things, the Gothenburg City Theatre and in most studios and apartment project in which all floor joists are covered with a strip of UAR-10.
Airborne sound absorbent of polyether foam load with finishes of 4% perforated vinyl.
We have found a color and quality that is both stylish and practical for most applications.
The tile is wiped.
The tile used in areas where the requirements on appearance and surface wear is essential. Eg upholstery in vehicle cabins, public spaces, studio environments, etc.