Noise Barriers

Swedac have a wide range of insulating mats.
  • Insulating mats usually used for encapsulating the audio or shut out noises, i.e. it is used as a barrier by its basis weight.
  • Insulating mats are available in various shapes depending on customer requirements.
  • For example, the insulating mats in sheet form which is a stiffer, these are used when the planar surfaces to be insulated.
  • There are also insulating mats lying on a roll, these are slightly softer and flexible and applied to the lining of the tube.
  • Swedac also have insulating mats that are fire rated and approved for use in marine applications
  • Most often combines an insulation blanket with a sound absorbing material to obtain a so-called double wall and thus have better soundproofing.
  • For a single wall construction shall airborne sound reduction according to the acoustic mass law to increase by 6 dB per octave and by 6 dB at double the weight.

Barrier BM 1000 Series

Heavy sound insulating layer of PVC plastic. Insulation of the engine compartment of tractors, construction equipment, trucks, cars and boats. Improvement of airborne sound reduction in single and double walls.

Can be glued with contact adhesive, type Bostik 1782 or similar.

BM0050 - weight: 5 kg/m2, thickness: 2 mm, format: 3*1,25
BM0070 - weight: 8 kg/m2, thickness: 3 mm, format: 3*1,25
BM1095 - weight: 15 kg/m2, thickness: 9 mm, format: 3*1,25
(finishes foil, back jute)

Standard format

  • Rolls 1,25 x 3 m
  • Other sizes made to order


Barrier Mat ISM 75

Insulation ISM 75 consists of a flexible, thermoformable heavy layer based on EVA and inorganic fillers. ISM 75 is halogen free.

The barrier mat is fitted directly against the surface to be insulated using double-sided tape or mechanical fastening.

ISM-75-S is equipped with self-adhesive backing for easy application. Can also be thermoformed to fit the irregular surface. Possible to bend.

Standard format

  • Sheet size: 1250 x 1000 mm
  • Basis weight 7,5kg/m2
  • Other sizes made to order

Barrier Mat BPL

Barrier BPL consists of a flexible heavy layer based on bitumen and inorganic fillers. BPL is equipped as standard with adhesive backing for easy application.

Embossed surface of the cover sheet of plastic.Popular solution for domestic appliances.

Standard format

  • Sheet size: 1200 x 1000 mm
  • Available as BPL-35-S and BPL-75-s
  • Basis Weight 3.5kg / m2 and 7,5kg / m2
  • Other sizes made to order

Barrier mat Superflex

Superflex SF 75 consists of a flexible heavy film on the basis of rubber, thermoplastic resins and inorganic fillers. Superflex SF 75 is free from halogens (chlorine, bromine, etc.), lead, bitumen and crude aromatic oils. Superflex SF-75 is more flexible than cold BM1000 series.

Standardformat

  • Thickness: 3 mm
  • Sheet size: 3000 x 1250 mm
  • Basis weight: 7,5kg / m2

    The barrier mat is fitted directly against the surface to be insulated using adhesives or mechanical fastening. Superflex SF 75-S is equipped with self-adhesive backing for easy application.

Swedac Powerflex

Swedac Powerflex was developed together with a supplier of insulating mats when we received several inquiries regarding insulating mats suitable for the marine sector.

We made a fire tests at SP and took out approvals by Bureau Veritas.

  • Swedac Powerflex was produced in various thicknesses / weights to meet different requirements for sound insulation. Currently stocked 50FF (5kg / m2) and 150FF (15kg / m2). 100FF (10kg / m2) is taken home by the large requests.
  • Swedac Powerflex has over the years been used for marine applications with good results. Powerflex has also been used as pipe insulation in environments where there are demands for a “neat” surface layer.
  • Powerflex FF consists of a flexible heavy film on the basis of rubber, thermoplastic resins and inorganic fillers with surface layers of reinforced aluminum foil.
  • Powerflex FF is free of halogens (chlorine, bromine, etc.), lead, bitumen and crude aromatic oils.
  • Powerflex sold in sheets of 2000x1200mm

Floor mat GM-1340

Durable checker plate rubber mat with spacers made of polyethylene foam.

Popular solution for truck cabs, construction machinery as well as floor mat at workplaces with static stationary work.

Standard format

  • Sold in 1400mm width max 4000mm length
  • Total thickness: 13mm
  • Other sizes made to order